Low-Profile Hydraulic Power Tilt The HT features a full-length tilting deck powered by an electric-over-hydraulic system (standard on Pro Series).

The Benefit: Unlike gravity tilts that require you to find the "sweet spot" to tip the bed, the HT gives you a Power Up / Power Down hydraulic system. You have total control from a wired or wireless remote, allowing you to stop the deck at any angle for safe, incremental loading.

8" Channel Main Frame & Tongue Double A steps up the structural integrity with an 8" channel frame, providing a much stiffer chassis than the 5" or 6" frames found on standard utility tilts.

The Benefit: This extra steel prevents the frame from "bowing" or twisting over time. Even when loading a heavy machine with concentrated weight at the pivot point, the I-beam-style strength of the 8" channel ensures the trailer stays true and tracks straight.

Torsion Axle Suspension (Standard Upgrade) The Pro Series HT typically comes standard with tandem 7,000 lb torsion axles (14k-15.4k GVWR).

The Benefit: Torsion axles provide a much smoother ride and superior load-independent suspension compared to traditional leaf springs. This is critical for protecting the hydraulics on your skid steer from road vibration and "chatter" during long hauls.

-65°C Arctic Rated Wiring Harness A hallmark of the Double A lineup, this harness is built to withstand the most brutal winters in North America.

The Benefit: In sub-zero temperatures, standard wiring turns into brittle plastic that snaps and shorts out. The Arctic-rated harness remains flexible and fully sealed, ensuring your hydraulic pump and electric brakes work every single time you hit the switch.

Heat-Treated Douglas Fir Decking The deck is surfaced with premium Douglas Fir, which is far superior to the southern yellow pine used on many US trailers.

The Benefit: Douglas Fir is naturally denser and more resistant to "mushrooming" under the weight of metal tracks. The heat treatment stabilizes the wood, preventing the boards from warping, cupping, or popping out of the frame over years of service.

Integrated Locking A-Frame Toolbox The front tongue is occupied by a large, lockable steel toolbox that houses the hydraulic pump, deep-cycle battery, and integrated charger.

The Benefit: This keeps your expensive hydraulic components protected from road debris and theft while leaving extra room for you to store your chains, binders, and gloves in a dry, secure spot.

SAFETY: Low Loading Angle Because the deck sits between the fenders, the loading angle is significantly lower than a deckover (usually around 11–12 degrees). This makes it the safest option for loading low-clearance equipment like scissor lifts or paving rollers.

CONVENIENCE: Onboard Charging The 2026 HT comes standard with a 110V integrated inverter charger. Simply plug the trailer into a wall outlet at the end of the day to ensure the battery is fully charged for the next day's work.

DURABILITY: 6-Step Powder Coat Double A’s finish includes a full sandblast and primer before the powder coat is applied. This creates a rock-hard barrier against the corrosive road salt and brine used on northern highways.

RELIABILITY: Alberta Tough Manufactured in Alberta, Canada, this trailer is over-engineered to survive the most demanding environments on the continent, maintaining its structural integrity (and resale value) long after budget trailers have rusted out.