6'x10' Quality Cargo Fiber Optic Splicing Trailer Fiber Splicing Trailer

Chassis and Structure

• Frame: 2×6 frame with 2×4 steel tube main rails.
• Exterior skin: White screwed metal exterior with Galvalume roof and 24" front stoneguard.
• V-nose: V-nose with vertical ATP trim and ATP applied over polycore on V-nose and rear with J-rail on all edges.
• Roof and wall framing: Roof members 24" O.C.; wall members 16" O.C.; 1" × 1 1/8" steel tube in walls and ceiling.
• Floor: 3/4" plywood floor painted underneath; floor crossmembers 16" O.C.

Dimensions and Access

• Interior height: 75" (6'3") plus 9" extra height (7').
• Doors and access: Double rear doors with bar lock or ramp; two 32" × 75" RV-style side doors with 15" × 30" windows (center rear and passenger side, right-hand open); two 16" × 18" splicing access doors with brushes (rear driver side); two RV pull-out steps.
• Generator box: 36" × 36" × 36" generator box with slide-out (half in/half out) and provision for a 30A motorbase plug.

Axles Wheels and Tires

• Axles: Tandem 3500 lb spring axles (spec lists 3500 straight axles as well—confirm final axle type).
• Hubs: EZ Lube hubs.
• Wheels and tires: Westlake Mud Legend ST235/75R15 - 5 Lugs
• Fenders: Aluminum fenders with integrated lights.

Exterior Options and Accessories

• Finish: Tan Polycore exterior. (.080)
• Trim and protection: ATP fenders; ATP trim on V-nose and rear; wider ATP on corners.
• Racks and ladders: Two ladder racks; access ladder on passenger side V-nose.
• Blackout package: Exterior blackout package and matching interior blackout option.

Interior Fit out for Splicing Work

• Insulation and finishes: Cool Shield bubble R-foil insulation in walls and ceiling; white vinyl walls and ceiling with black corners and black cove trim.
• Flooring: Rubber coin flooring for durable, non-slip surface.
• Work surfaces: Driver side long black countertop; passenger side fold-down black countertop or fixed 18" wide counter; seams positioned at front and rear only.
• Storage: Driver side 24" wide base cabinet under counter; overhead 36" white-face cabinet with two doors; three drawers under driver counter (drawers located toward rear; bottom drawer deeper).
• V-nose workspace: Black countertop across entire V-nose

Electrical and Lighting

• Power provisions: 30A electrical package and 30A motorbase plug inside generator box; battery with converter/charger; dedicated receptacles (multiple outlets).
• Interior lighting: Dome lights and 110V LED ceiling fixtures.
• Exterior and safety lighting: Exterior LED fixtures; traffic advisor light bar mounted above rear RV door; two strobe lights on roof; LED strip tail lights.

HVAC and Climate Control Prep

• Ventilation: Non-powered roof vent or sidewall vent.
• Minisplit prep: Wiring and mount provided on driver side V-nose for minisplit A/C to enable climate control for splicing operations.

Worksite Features for Fiber Splicing

• Cable entry: Two splicing doors with brushes for protected cable access.
• Onboard power support: Generator box slide-out and battery compartment for portable and onboard power; 50A electrical capability to run splicing equipment and heaters.
• Workspace layout: Long counters, fold-down counter, overhead storage, and drawers arranged to create dedicated splicing stations and secure tool storage.
• Climate control readiness: Insulation, vinyl finishes, and minisplit wiring prep to maintain stable interior conditions for sensitive splicing work.